Evolution RAGE3S3002 Manual de instrucciones Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
32
www.evolutionpowertools.com
MAINTENANCE
NOTE: Any maintenance must be carried out
with the machine switched off and disconnected
from the mains/battery power supply.
Check that all safety features and guards are
operating correctly on a regular basis. Only use
this machine if all guards/safety features are fully
operational.
All motor bearings in this machine are lubricated
for life. No further lubrication is required.
Use a clean, slightly damp cloth to clean
the plastic parts of the machine. Do not use
solvents or similar products which could
damage the plastic parts.
WARNING: Do not attempt to clean by inserting
pointed objects through openings in the
machines casings etc. The machines air vents
should be cleaned using compressed dry air.
Excessive sparking may indicate the presence of
dirt in the motor or worn out carbon brushes. If
this is suspected have the machine serviced and
the brushes replaced by a qualified technician
Table Insert
A two piece table insert is fitted to this
machine. If either side is damaged or worn,
both parts must be replaced. Replacement
inserts (sold in handed pairs) are available
from your supplier or Evolution Power Tools.
To replace the table inserts:
• Remove the 3 or 4 cross-head screws that
secure one of the inserts to the rotary table.
• Lift the insert from the table.
• Remove any debris that may have
accumulated under the insert.
• Fit the replacement insert, and replace the
three fixing screws.
• Repeat the process for the other side.
• Check that all 6 or 8 fixing screws are
tightened securely, and that both inserts
are lying flush and level within the table.
ENVIRONMENTAL PROTECTION
Information (for private householders) for the
environmentally responsible disposal of Waste
Electrical and Electronic Equipment (WEEE).
This symbol on products, or accompanying
documents, indicates that used and end of
life electrical and electronic equipment should
not be disposed of with household waste.
For proper disposal, treatment, recovery
and recycling, please take these products to
designated collection points, where they will
be accepted on a free of charge basis
Alternatively, in some countries you may
be able to return your products to your retailer
upon the purchase of an equivalent new
product. Disposing of this product correctly will
help to save valuable resources and prevent
any potential adverse effects on human health
and the environment, which could otherwise
arise from inappropriate waste disposal and
handling. Please contact your local authority
for further details of your nearest designated
collection point. Penalties may be applicable for
incorrect disposal of this waste in accordance
with national legislation.
For Business Users in the European Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other Countries
outside the European Union
This symbol is only valid in the European Union.
If you wish to dispose of this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios