Evolution RAGE3S3002 Manual de instrucciones descargar pdf (Pagina 12)

12

www.evolutionpowertools.com

ADDITIONAL ACCESSORIES

In addition to the standard items supplied with

this machine, other accessories are available

to enhance its performance. These include the

following items:

Additional accessories and information on the

use and type of accessory suitable for your

machine can be obtained by contacting your

local dealer (or Evolution Power Tools).

UNLATCHING AND RAISING

THE CUTTING HEAD

WARNING: To avoid serious injury, NEVER

perform the unlocing or locking procedure

unless the saw is OFF and the blade stopped.

To Release the Cutting Head from the

Locked Down position:

• Gently press down on the Cutting Handle.

• Pull out the head latching pin (Fig. A) and

allow the Cutting Head to rise to its upper

position. (Step 1 & 2)

• The Cutting Head will automatically rise to

the upper position once it is released from

the locked down position. (Step 3)

• It will automatically lock in the upper

position.

If Release is Difﬁcult:

• Gently rock the Cutting Head up and down.

• At the same time twist the Head Latching

Pin clockwise and pull outwards.

NOTE: We recommend that when the machine

is not in use the Cutting Head is locked in

its down position with the latching pin fully

engaged in its socket.

Fig. A

DESCRIPTION PART No

Specialist cutting blades

(use only Evolution Blades

with this machine)

Speciﬁc to

blade type

Dust Collection Bag EV3S174 or

SR3S174

Workpiece Support Bars EV3S1 or

SR3S1

End Stop (Repetitive Cutting) EV3SM3 or

SR3SM3

Step 1 & 2

Step 3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comentarios a estos manuales

Sin comentarios