Evolution RAGE3S3002 Manual de instrucciones descargar pdf (Pagina 26)

www.evolutionpowertools.com

To reposition:

• Lift up the lever and turn to a convenient position

Release the lever

• Stand to the left side of the handle when making a cut.

When cutting is completed:

• Release the ON/OFF trigger switch, but keep

your hands in position vand allow the blade to

completely stop.

• Allow the Cutting Head has to rise to its upper

position, with the lower blade guard completely

deployed before removing yours hand(s).

• Return the Cutting Head to the perpendicular

position.

• Tighten the bevel lock lever.

COMPOUND CUTTING (Fig. 33)

A compound cut is a combination of a mitre and bevel

cut employed simultaneously.

When a compound cut is required, select the desired

bevel and mitre positions as previously described.

Compound cutting with the sliding carriage system

deployed is possible. Always check that the sliding

blade does not interfere with the machines fence or

any other parts of the machine.

Adjust the upper left hand section of the fence if

necessary.

Fig. 30 Cutting Head set at bevel angle

Fig. 31 View of bevel lock handle

Fig. 32

View of bevel protractor scale & pointer

Fig. 33

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Sin comentarios

Evolution RAGE3S3002 Manual de instrucciones Pagina 26