Evolution RAGE3S3002 Manual de instrucciones descargar pdf (Pagina 31)

www.evolutionpowertools.com

FINAL SAFETY CHECKS FOR SELF-ASSEMBLED MACHINES ONLY

All the Yes Boxes must be ticked before the machine can be used. No tick = No use.

Condition Yes

Slides Inserted through the Bevel Neck and connected to the

Cutting Head. Locating lugs successfully deployed

Positive Stop

Locking Lever

Installed onto Locking Mechanism

Mitre Locking

Handle

Installed onto Locking Screw

Power Cable Routed correctly and fastened to back slide bracket.

50 – 60mm max deﬂection at the midpoint

Blade Blade installed with rotation arrows matching. Outer blade

ﬂange and arbor bolt and washer correctly ﬁtted

Safety Guards Lower Safety Guard fully operational. Cutting Head locks in

the upper position with blade covered. Cutting Head can only

be lowered when Blade Guard Locking trigger is operated

Supply Supply matches speciﬁcation found on machine Rating Plate.

Plug matches power source outlet

Mounting Either: a) Machine permanently sited and bolted to

workbench

b) Machine mounted on board which is clamped to

workbench (for portable use)

c) Machine bolted to a dedicated Mitre Saw Stand

Sited Adequate provision made for the handling of long or irregular

shaped workpieces

Environment Dry, clean and tidy. Temperature conducive to material

handling. Lighting adequate (double banked if ﬂuorescent

lights are used).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Sin comentarios

Evolution RAGE3S3002 Manual de instrucciones Pagina 31