Evolution Fury 6 Manual de instrucciones descargar pdf (Pagina 8)

www.evolutionbuild.com

3. Always protect your lungs. Wear a face

mask or dust mask if the operation is dusty.

4. Always protect your hearing. Wear hearing

protection during extended periods of operation.

5. Inspect the machines power cord regularly

and if damaged have it repaired or replaced.

Always be aware of the cords location.

6. Always check for damaged parts. Before

further use of the tool, a guard or other part

that is damaged should be carefully checked to

determine if it will operate properly and perform

its intended function. Check for misalignment or

binding of moving parts, breakage of parts, and

any other condition that may affect the tool’s

operation. A guard or other part that is damaged

should be properly repaired or replaced at a

qualiﬁed service centre. Keep guards in place

and in working order.

7. Do not abuse the cord. Never use the

cord to carry the tool or pull the plug from the

outlet. Keep cord away from heat, oil, sharp

edges or moving parts. Replace damaged cords

immediately. Damaged cords increase the risk

of electric shock.

8. Always make sure that your extension

cord is in good condition. When using an

extension cord be sure to use one that is heavy

enough to carry the current that your tool will

draw. An undersized cord will cause a drop in

line voltage, resulting in loss of power and

overheating.

9. Do not use the tool while tired or under the

inﬂuence of drugs, alcohol or any medication.

Following this rule will reduce the risk of electric

shock, ﬁre or serious personal injury.

10. Save these instructions. Refer to them

frequently and use them to instruct others who

may use this tool. If someone borrows this tool,

make sure they have these instructions also.

11. When the correct blade to cut the material

has been ﬁtted, this saw is recommended for

cutting steel and ferrous metals, aluminium

and non-ferrous metals, wood, and plastic

only.

12. Do not use saw blades with High Speed

Steel (HSS) or blades that are damaged or

deformed.

13. Replace the table insert when worn.

14. Use only saw blades recommended by the

manufacturer and which are the exact bore

and diameter required for this machine.

15. Connect your mitre saw to a dust collecting

device (I.D.Ø32mm) when sawing material

likely to cause dust.

16. Select saw blades in relation to the

material to be cut. Use only genuine Evolution

or Evolution recommended accessories.

17. Check the maximum depth of cut.

18. When sawing long work pieces, always

use extra support to provide better support,

and use clamps or other clamping devices. To

reduce the risk of injury, return the slide carriage

to the full rear position after each crosscut

operation.

19. The operator is adequately trained in the

use adjustment and operation and operation

of the machine.

20. Provide for adequate room lighting at

your workplace or for adequate lighting of the

immediate work area.

21. When ﬁtted with a laser no exchange

with a different type of laser is permissible.

Repairs shall only be carried out by the laser

manufacturer or an authorised agent.

22. Refrain from removing any cut-offs or other

parts of the workpiece from the cutting area

whilst the machine is running and the saw

head is not in the rest position. Never reach

around the saw blade. Turn off tool and wait for

saw blade to stop before moving workpiece or

changing settings.

23. Never stand on this tool. Serious injuries

could occur if this tool tips over and you come

into contact with the saw blade.

24. Reduce the risk of unintentional starting.

Make sure switch is in off position before

plugging in.

WARNING: the operation of any mitre saw can

result in foreign objects being thrown into your

eyes, which can result in severe eye damage.

Before beginning power tool operation, always

wear safety goggles or safety glasses with side

shield and a full face shield when needed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comentarios a estos manuales

Sin comentarios

Evolution Fury 6 Manual de instrucciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Sierras circulares Evolution Fury 6