Evolution FURY Twin 125 Manual de instrucciones descargar pdf (Pagina 6)

RAGE TWIN

www.evolutionbuild.com

SPECIFIC SAFETY RULES & SYMBOLS

PRECAUTIONS ON USING FURY TWIN

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of

the power tool for operations different from those intended

could result in a hazardous situation.

5) Service

a) Have your tool repaired by a qualiﬁed person. This electric

tool complies with the relevant safety rules. Repairs should

only be carried out by qualiﬁed persons using original spare

parts, otherwise this may result in considerable danger to

the user.

b) When servicing a tool, use only genuine Evolution

replacement parts. Follow instructions in the Maintenance

section of this manual. Use of unauthorized parts or failure

to follow Maintenance Instructions may create a risk of

electric shock or injury.

WARNING! DO NOT OPERATE MACHINE IF WARNING

AND / OR INSTRUCTION LABELS ARE MISSING OR

DAMAGED. CONTACT EVOLUTION POWER TOOLS FOR

REPLACEMENT LABELS.

Symbol

Description

Volts

Amperes

Hertz

min

Minutes

Alternating current

no load speed

Double Insulated

Read instruction manual

Wear safety goggles

Wear ear protectors

Wear dust mask

Wear gloves

Wear safety boots

It is recommended to use genuine Evolution replacement

blades. Check blade ﬂanges for debris before installing any

new blade. Do not use dull or broken blades. Check blades

often for condition and wear. Damaged or worn blades

should be replaced immediately. Always make provisions for

safe handleing of excess material.

To obtain an additional copy of your manual, please contact

Evolution Power Tools at:

UK 0870 609 2297

USA 1-866-EVO-TOOL

Web www.evolutionpowertools.com

1. DANGER: Keep hands away from cutting area and the

blade. Keep your second hand on auxiliary handle, or motor

housing. If both hands are holding the saw, they cannot be

cut by the blade.

2. Do not reach underneath the work. The guard cannot

protect you from the blade below the work. Do not attempt

to remove cut material when blade is moving.

3. Never hold piece being cut in your hands or across your

leg. It is important to support the work properly to minimize

body exposure, blade jamming, or loss of control.

4. Always check the blades before starting the machine. If it

is cracked, broken or bent, do not use it. Carefully start the

machine to check for other abnormalities.

5. Hold the power tool by insulated gripping surfaces

when performing an operation where the cutting tool

may contact hidden wiring or its own cord. Contact with

a “live” wire will also make exposed metal parts of the

power tool “live” and shock the operator.

6. Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades that

do not match the mounting hardware of the saw will run

eccentrically, causing loss of control.

7. Start working only when maximum rotation speed is

reached.

8. Excessive force overloads the motor and reduces working

efﬁciency and service life.

9. Check the operation and condition of the guard spring. If

the guard and the spring are not operating properly, the must

be serviced before use.

10. Always observe that the lower guard is covering the

blade before placing the saw down on bench or ﬂoor.

An unprotected, coasting blade will cut whatever is in its

path. Be aware of the time it takes for the blade to stop after

switch is released.

11. Never attach any tool except the blades or cutting wheel

as speciﬁed by the manufacturer. Do not operate the cutter

while applying water.

12. Never use damaged or incorrect blade washers or bolt.

The blade washers and bolt were specially designed for your

saw, for optimum performance and safety of operation.

13. Do not use this machine to cut asbestos.

14. OVERLOAD LIMITER - It protects the machine of the

excess loads. To put back the machine to its initial state,

press on the button “reset” which is behind the device.

CAUTION! Always unplug the disc cutter before changing

blades, servicing, cleaning or adjusting the saw.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios

Evolution FURY Twin 125 Manual de instrucciones Pagina 6

Comentarios a estos manuales